*See Deal’s Heating and Air, your participating Trane dealer, for complete program eligibility, dates, details and restrictions. Instant rebate up to $600. All sales must be to homeowners in the United States. Void where prohibited.
Valid on Qualifying Equipment only. Offer expires 05/31/2022.
When you live in Claxton, GA, you know how important it is to have a functioning HVAC system during the winter and summer months. However, some HVAC issues are actually control issues, which is concerning since your thermostat controls your HVAC system. Below are five signs your home needs a new thermostat.
The average lifespan of a control is about 10 years, after which it can start malfunctioning. If you have a non-programmable control, even one with a needle, it’s past time to upgrade. A programmable thermostat provides greater efficiency and helps to control your indoor air quality.
Unless your power company raised their rates or there’s a cold snap or heat spike, your utility bill should remain fairly constant. If a technician can rule out the other reasons for higher energy bills, such as ductwork leaks or dirty air filters, your thermostat might be the cause.
When you change the settings on your thermostat, you expect a response within a minute. If your control doesn’t respond to your commands, it’s time to call a professional to replace or repair your control.
Your thermostat should have a display that shows the room temperature, what you have the temperature set to, as well as the humidity level in the home. If you notice a blank display or it’s showing the wrong temperature, this is another sign you need your control repaired or replaced.
Unless you have an older thermostat, your control should have a display. If you notice that it’s displaying the wrong temperature, is blank, or the buttons aren’t working, it’s a sign you need your control repaired or replaced.
If you notice any of the above with your control, then it’s time to act. Contact Deal’s Heating & Air today to have one of our trained technicians inspect your thermostat to determine ways to make your HVAC system work for you.
Image provided by iStock
If you experience power outages in your Metter, GA home, you’ve probably considered getting a generator. These provide you with power in cases of emergency and help keep you and your family safe and warm, especially in the winter. Learn about the major differences between portable and standby whole-home generators and how to know which one is right for your home.
Though there are other options, the two most common and popular generator types are portable models and wired-in whole-home backup generators. A portable model is less expensive but a lot less convenient. A backup generator can be a good-sized expense, but the added power, convenience and peace of mind make the cost worth it for many, especially when the heat goes out.
These units power a portion or certain appliances in your home of your choosing, and have a wide range of costs, depending on amount of power it provides. Though they’re less expensive, they have to be manually turned on, leaving your home in a dangerous position should the power go out while you’re away. If power outages are a rare occurrence you’re not too worried about, a portable model might make sense.
A standby generator costs a more significant amount of money, though the extra cost is made up for with quieter operation, the ability to power your entire home and the convenience of not having to worry about your home while you’re gone. They automatically turn on when the electricity goes out and can power your home without needing more fuel. Though they’re expensive, for many families, the features an safety they provide is well worth the cost.
Think a whole home generator might be a worthwhile investment? Give us a call at Deal’s Heating & Air and inquire about our electrical service offers, including whole-home generator installation. We look forward to helping you with your electrical needs.
Image provided by iStock
Shopping for thermostats isn’t something you get to do every day, but you definitely want to do it right when it’s time to replace your existing one. Over the years, the thermostat market has been rapidly changing, with newer and smarter designs that fit different budgets and circumstances. Here are four ways to choose the right thermostat for your home in Sylvania, GA.
Cost is arguably the most heavily considered factor when consumers make a final decision, whether it’s for thermostats or avocados at the grocery store. Programmable thermostats tend to be less expensive than their smart counterparts. Most programmable models enable temperature presets for different times and days of the week.
What smart thermostats lack in budget sensibility they make up for in energy efficiency. Smart thermostat models boast myriad features that allow you to streamline HVAC system operations, which help reduce your home’s power consumption and monthly utility costs.
When choosing a smart thermostat, it’s best to consult an HVAC technician regarding which thermostats are compatible with your existing HVAC system. Some models will not work with particular HVAC setups.
Non-connected programmable thermostats can work with dated HVAC systems that have a limited number of low-voltage wires, yet more contemporary designs typically require a C-wire or common wire. This particular wire continuously supplies electricity for the user interface, Wi-Fi and other important thermostat features.
If your outdated thermostat has always dampened your home’s aesthetics with its boxy, unintuitive design, shopping for a new thermostat gives you the opportunity to pick one that complements your home’s interior. Today’s thermostat market leaves you with plenty of options to choose from.
Consult with Deal’s Heating & Air today to get professional help on the type of thermostat you should get for your HVAC system. In addition to thermostats, we also provide a full array of HVAC systems, repairs and maintenance services.
Image provided by iStock
Summer is here, and it’s hotter than ever. The AC systems in Metter, GA, homes use a lot of energy and cause utility bills to skyrocket. Make sure you’re boosting your AC efficiency with these simple tricks.
A programmable thermostat can boost energy efficiency by more than 30%. Advanced smart thermostats offer multiple settings that allow you to change the temperature when you’re at home and adjust it manually when you’re at work or out enjoying recreation. Your HVAC contractor can install a new programmable thermostat for you this summer.
Keeping your system clean is a must. Dust and debris can clog the components, reducing efficiency and increasing costs.
Check the filter monthly to make sure it’s free of dust, replace it as needed, and you’ll notice better air quality immediately. Although experts recommend changing filters every 3 months, that may not be enough if you live in a dusty place.
If you don’t schedule maintenance for your AC system, problems are bound to develop. This is also true for any appliance in your home. A professional can inspect your air conditioner and optimize it to ensure it’s giving you peak performance.
Outside units should be free of debris. AC filters can become clogged if they’re filled with dust and dirt, compromising cooling efficiency. HVAC technicians recommend a tune-up twice a year due to the deterioration of parts from dust and debris.
It’s time to start thinking of ways to improve energy efficiency at home. Cooling systems can be expensive and are hard on the environment, but there are simple changes you can make at home that’ll reduce AC expenses and keep your home cool without breaking your budget. For more information about air conditioning repairs, contact our team at Deal’s Heating & Air.
Image provided by iStock
One feature that your new home in Brooklet, GA, shouldn’t miss is an efficient air conditioning system. When it comes to airflow in and out of your home, you can choose between a ductless or ducted AC system. Below are four benefits you’ll reap from installing a ductless mini-split AC system.
Installing ducted HVAC systems can take AC installation and repair technicians a number of days up to a week continuous work. Ductless mini-split systems can be installed, usually within a day, regardless of the number of units installed.
Installing mini-split ductless systems is just a matter of connecting small pipes to a 3-inch hole. The minimal installation work and short installation time translate to lower installation costs.
One indispensable quality of a ductless mini-split system is its incredibly high energy-efficiency ratings. The absence of ducts results in a reduction of energy loss. Ductless mini-split systems work to optimize AC efficiency and operation while maintaining control over the temperature.
Ductless mini-split systems are compact and flexible. The best ductless systems have up to four indoor air distribution or handling units for every outdoor unit.
Therefore, you can cool four rooms with a single outdoor ductless unit. The mini-split AC system can connect to different thermostats to ease temperature control.
Ducted cooling units aren’t as quiet as mini-split units. The manufacturers optimize these units for overall user comfort. Even when set for high AC levels, mini-split cooling units are considered whisper quiet.
Mini-split cooling AC systems have fans designed to run at lower speeds, which is one of the features that make them run quietly. Furthermore, ductless units have their condensers and compressors installed outside, which reduces indoor noise pollution.
For quality ductless AC installation and repair services, contact us at Deal’s Heating & Air Conditioning. We are your go-to professional HVAC technicians, and we’ll ensure your total satisfaction.
Image provided by iStock
